LATEST NEWS
- SYSTEM LOADING -
01
初級 [SHOKYUU]
BASIC
This category is a test of the strength of your basic skills. Strong basics serves as the cornerstone for intermediate to more advanced skills. Hence, it is an important aspect of the craft. Entrants are required to build the kit with no modifications, additional details and/or enhanced parts. Alternate colour schemes are highly recommended.
Judging will be based on the following criterias:-
-
Preparation of surface
-
Removal of seam lines
-
Paint and finishing
-
Creativity i.e colour scheme, pose
-
Decaling
-
All mecha/robot model kits from official brands/manufacturers. Strictly no knock-offs, resins or 3D printed products of similar nature.
-
All scales.
-
Dimensions: 30cm [L] X 30cm [D] X 50cm [H]
-
Anything not mentioned in the list above will not be taken into consideration during judging.
FAQ
Foreword: While we try our best to make the rules as explicit as we can, this is an almost impossible task. What we are doing here is to make some exceptions and parameters to adhere so to make the category enjoyable. All we seek is for everyone's understanding and to work with us to make this event a success! Drop us an email if you need further clarifications. Thanks in advance!
-
Do I need to remove seam lines and nub marks?
-
Yes, you should attempt to remove all visible seam lines (including those on weapons) as well as nub marks as much as possible.
-
-
Can I change the original colour scheme?
-
Yes, we encourage alternate colour schemes.
-
-
Can I add additional decals?
-
Yes, similar to colour schemes, you can use after market, customized decals/stickers.
-
-
Can I add weathering and battle damages?
-
Yes, weathering is allowed but not battle damage.
-
-
Can I add LEDs?
-
No, adding LEDs is considered as modification unless the product comes with LED installation.
-
-
Can I add metal parts, pla-strips or plates and/or photo-etched parts?
-
No, additional details or add-on parts are strictly prohibited.
-
-
Is the base/diorama required?
-
Although base and diorama is not a requirement, a base to secure the kit is highly recommended.
-
-
Bootleg products allowed?
-
No, all bootlegs, knock-offs are strictly prohibited. Contestants will be disqualified without notice.
-
-
Can I sharpen the "v-fins" and certain parts?
-
Yes, you can sharpen "v-fins" and other parts but not to the point that the orignal shape to be altered.
-
-
Can I re-scribe or deepen existing panel lines?
-
Yes, you may do so. However, do take note this strictly applies to existing panel lines.
-
-
Can I add additional weapons?
-
No additional weapons are allowed unless it forms part of the mecha setup. I.e. Perfect Strike.
-
02
上級 [JŌKYUU]
ADVANCED
This category covers all aspects of the craft. Entrants are called upon to display their myriad of skills and techniques to bring their creations from paper to life. We expect entrants to uphold the highest standards to the best of their abilities and at the same time, push their limits, exploring uncharted frontiers and forge new skills.
Judging encompasses all aspects of the craft. Do be reminded that foundation is as important as the advanced skills/techniques. Therefore, expect a high level of scrutiny from the panel of judges.
-
All mecha/robot model kits from official brands/manufacturers.Strictly no knock-offs, full resins or 3D printed products of similar nature.
-
All scales.
-
Dimensions: 45cm [L] X 45cm [D] X 50cm [H]
-
Judging will be based on all aspects of the craft.
FAQ
Foreword: While we try our best to make the rules as explicit as we can, this is an almost impossible task. What we are doing here is to make some exceptions and parameters to adhere so to make the category enjoyable. All we seek is for everyone's understanding and to work with us to make this event a success! Drop us an email if you need further clarifications. Thanks in advance!
-
Do I need to remove seam lines and nub marks?
-
Yes, you should attempt to remove all visible seam lines (including those on weapons) as well as nub marks as much as possible.
-
-
Can I change the original colour scheme?
-
Yes, we encourage alternate colour schemes.
-
-
Can I add additional decals?
-
Yes, similar to colour schemes, you can use after market, customized decals/stickers.
-
-
Can I add weathering and battle damages?
-
Yes, both are allowed in the Advance category.
-
-
Can I add LEDs?
-
Yes, but do consider the safety aspect of your battery setup.
-
-
Can I add metal parts, pla-strips or plates and/or photo-etched parts?
-
Yes, you can.
-
-
Is the base/diorama required?
-
Yes, a base to secure the kit is highly recommended. It also adds to the entire presentation of the entry.
-
-
Bootleg products allowed?
-
No, all bootlegs, knock-off kits are strictly prohibited. Contestants will be disqualified without notice.
-
-
Can I use conversion kits?
-
No, full conversion kits are not allowed. Contestants will be disqualified without notice. We encourage contestants to make their own creations.
-
-
How about weapons and accessories add on?
-
Yes, weapon add ons and accessories from any brands are allowed.
-
-
Can I use small detailing parts that are 3D printed?
-
Yes, but only small detailing parts. Similar to Kotobukiya option parts, these are allowed as long as they are not full conversion parts.
-
03
鉄メイデン [アイアン・メイデン]
IRON MAIDEN
Back by popular demand and growing interest in the ladies! Contestants are called upon to push their limits by bringing to life their ideal “Musume” in the most imaginative and captivating way.
Similar to the Advanced Category, the foundation is as important as the advanced skills/techniques. Judging will encompass all aspects of the craft. Come be a part of this rapidly growing segment of plastic scale modelling!
-
Main / Base Kit must be a female character plastic model kit from official licensed brands or manufacturers.
-
Kit bashing and scratch build to promote personalised design are highly encouraged.
-
Resin conversion parts are strongly discouraged.
-
Full resin kits are not allowed.
-
Diorama and bases are highly encouraged and will be taken into consideration in the judging.
-
Maximum dimensions: 45cm [L] X 45cm [D] X 50cm [H]
FAQ
Foreword: While we try our best to make the rules as explicit as we can, this is an almost impossible task. What we are doing here is to make some exceptions and parameters to adhere so to make the category enjoyable. All we seek is for everyone's understanding and to work with us to make this event a success! Drop us an email if you need further clarifications. Thanks in advance!
-
Do I need to remove seam lines and nub marks?
-
Yes, you should attempt to remove all visible seam lines (including those on weapons) as well as nub marks as much as possible.
-
-
Can I change the original colour scheme?
-
Yes, we encourage alternate colour schemes.
-
-
Can I add additional decals?
-
Yes, similar to colour schemes, you can use after market, customized decals/stickers.
-
-
Can I add weathering and battle damages?
-
Yes, both are allowed in the IM category.
-
-
Can I add LEDs?
-
Yes, but do consider the safety aspect of your battery setup.
-
-
Can I add metal parts, pla-strips or plates and/or photo-etched parts?
-
Yes, you can.
-
-
Is the base/diorama required?
-
Yes, a base to secure the kit is highly recommended. It also adds to the entire presentation of the entry.
-
-
Bootleg products allowed?
-
No, all bootlegs, knock-offs are strictly prohibited. Contestants will be disqualified without notice.
-
-
Can I use conversion kits?
-
No, full conversion kits are not allowed. Contestants will be disqualified without notice. We encourage contestants to make their own creations.
-
-
Can I use small detailing parts that are 3D printed?
-
Yes, but only small detailing parts. Similar to Kotobukiya option parts, these are allowed as long as they are not full conversion parts.
-
RULES & REGULATIONS
-
Tetsujin is open to all hobbyists and enthusiasts from all nationalities except employees of Hobby Art Group and their immediate families.
-
The main entry/ base kit must not be a knock-off, resin or product of similar nature. Seek clarification from the organizers if in doubt.
-
After-market products, add-ons or materials of similar nature are permitted.
-
All entries must be wholly constructed and finished by the participant himself/herself.
-
Offensive and provocative subjects are strictly prohibited.
-
No restrictions on the number of entries each participant can enter for all categories. However, do note that registration fee (non-refundable) of S$28.00 per entry applies.
-
The entry must be submitted by the participant personally.
-
The organizer shall endeavor to ensure entries are adequately protected. However, they will not be liable for any loss and damage that may occur during the event.
-
Every entry will be inspected and rated by appointed judges. The judges’ decision is final and no appeal/ further correspondence will be taken into consideration.
-
Participants in contravention of the rules and regulations set out above will be disqualified without further notice.
-
Last but not least, challenge yourself and have fun!
SPONSORS
- SYSTEM LOADING -
PRIZES
Each category consists of a 1st, 2nd, 3rd & Merit winners.
2026

2026

2026

