BASIC
This category is a test of the strength of your basic skills. Strong basics serves as the cornerstone for intermediate to more advanced skills. Hence, it is an important aspect of the craft. Entrants are required to build the kit with no modifications, additional details and/or enhanced parts. Alternate color schemes are highly recommended.
Judging will be based on the following criteria:-
-
Preparation of surface
-
Removal of seam lines
-
Paint and finishing
-
Creativity i.e colour scheme, pose
-
Decaling
-
All mecha/robot model kits from official brands/manufacturers. Strictly no knock-offs, resins or 3D printed products of similar nature.
-
All scales.
-
Dimensions: 30cm [L] X 30cm [D] X 50cm [H]
-
Anything not mentioned in the list above will not be taken into consideration during judging.
FAQ
Foreword:
While we try our best to make the rules as explicit as we can, this is an almost impossible task. What we are doing here is to make some exceptions and parameters to adhere so as to make the category enjoyable. All we seek is for everyone's understanding and to work with us to make this event enjoyable and successful for all of us. Drop us a message if you need further clarification.
Thank you very much in advance!
Do I need to remove seam lines and nub marks?
Yes, you should attempt to remove all visible seam lines (including those on weapons) as well as nub marks as much as possible.
Can I change the original colour scheme?
Yes, we encourage alternate colour schemes.
Can I add additional decals?
Yes, similar to colour schemes, you can use after market, customized decals/stickers.
Can I add weathering and battle damages?
Yes, weathering is allowed but not battle damage.
Can I add LEDs?
No, adding LEDs is considered as modification unless the product comes with LED installation.
Can I add metal parts, pla-strips or plates and/or photo-etched parts?
No, additional details or add-on parts are strictly prohibited.
Is the base/diorama required?
Although base and diorama is not a requirement, a base to secure the kit is highly recommended.
Bootleg products allowed?
No, all bootlegs, knock-offs are strictly prohibited. Contestants will be disqualified without notice.
Can I sharpen the "v-fins" and certain parts?
Yes, you can sharpen "v-fins" and other parts but not to the point that the orignal shape to be altered.
Can I re-scribe or deepen existing panel lines?
Yes, you may do so. However, do take note this strictly applies to existing panel lines.
Can I add additional weapons?
No additional weapons are allowed unless it forms part of the mecha setup. I.e. Perfect Strike.
ADVANCE
This category covers all aspects of the craft. Entrants are called upon to display their myriad of skills and techniques to bring their creations from paper to life. We expect entrants to uphold the highest standards to the best of their abilities and at the same time, push their limits, exploring uncharted frontiers and forge new skills.
Judging encompasses all aspects of the craft. Do be reminded that foundation is as important as the advanced skills/techniques. Therefore, expect a high level of scrutiny from the panel of judges.
-
All mecha/robot model kits from official brands/manufacturers.Strictly no knock-offs, full resins or 3D printed products of similar nature.
-
All scales.
-
Dimensions: 45cm [L] X 45cm [D] X 50cm [H]
-
Judging will be based on all aspects of the craft.
FAQ
Foreword:
While we try our best to make the rules as explicit as we can, this is an almost impossible task. What we are doing here is to make some exceptions and parameters to adhere so as to make the category enjoyable. All we seek is for everyone's understanding and to work with us to make this event enjoyable and successful for all of us. Drop us a message if you need further clarification.
Thank you very much in advance!
Do I need to remove seam lines and nub marks?
Yes, you should attempt to remove all visible seam lines (including those on weapons) as well as nub marks as much as possible.
Can I change the original colour scheme?
Yes, we encourage alternate colour schemes.
Can I add additional decals?
Yes, similar to colour schemes, you can use after market, customized decals/stickers.
Can I add weathering and battle damages?
Yes, both are allowed in the this category.
Can I add LEDs?
Yes, but do consider the safety aspect of your battery setup.
Can I add metal parts, pla-strips or plates and/or photo-etched parts?
Yes, you can.
Is the base/diorama required?
Yes, a base to secure the kit is highly recommended. It also adds to the entire presentation of the entry.
Bootleg products allowed?
No, all bootlegs, knock-off kits are strictly prohibited. Contestants will be disqualified without notice.
Can I use conversion kits?
No, full conversion kits are not allowed. Contestants will be disqualified without notice. We encourage contestants to make their own creations.
How about weapons and accessories add on?
Yes, weapon add ons and accessories from any brands are allowed.
Can I use small detailing parts that are 3D printed?
Yes, but only small detailing parts. Similar to Kotobukiya option parts, these are allowed as long as they are not full conversion parts.
IRON MAIDEN
Back by popular demand and growing interest in the ladies! Contestants are called upon to push their limits by bringing to life their ideal “Musume” in the most imaginative and captivating way.
Similar to the Advanced Category, the foundation is as important as the advanced skills/techniques. Judging will encompass all aspects of the craft. Come be a part of this rapidly growing segment of plastic scale modelling!
-
Main / Base Kit must be a female character plastic model kit from official licensed brands or manufacturers.
-
Kit bashing and scratch build to promote personalised design are highly encouraged.
-
Resin conversion parts are strongly discouraged.
-
Full resin kits are not allowed.
-
Diorama and bases are highly encouraged and will be taken into consideration in the judging.
-
Maximum dimensions: 45cm [L] X 45cm [D] X 50cm [H]
FAQ
Foreword:
While we try our best to make the rules as explicit as we can, this is an almost impossible task. What we are doing here is to make some exceptions and parameters to adhere so as to make the category enjoyable. All we seek is for everyone's understanding and to work with us to make this event enjoyable and successful for all of us. Drop us a message if you need further clarification.
Thank you very much in advance!
Do I need to remove seam lines and nub marks?
Yes, you should attempt to remove all visible seam lines (including those on weapons) as well as nub marks as much as possible.
Can I change the original colour scheme?
Yes, we encourage alternate colour schemes.
Can I add additional decals?
Yes, similar to colour schemes, you can use after market, customized decals/stickers.
Can I add weathering and battle damages?
Yes, both are allowed in the this category.
Can I add LEDs?
Yes, but do consider the safety aspect of your battery setup.
Can I add metal parts, pla-strips or plates and/or photo-etched parts?
Yes, you can.
Is the base/diorama required?
Yes, a base to secure the kit is highly recommended. It also adds to the entire presentation of the entry.
Bootleg products allowed?
No, all bootlegs, knock-off kits are strictly prohibited. Contestants will be disqualified without notice.
Can I use conversion kits?
No, full conversion kits are not allowed. Contestants will be disqualified without notice. We encourage contestants to make their own creations.
How about weapons and accessories add on?
Yes, weapon add ons and accessories from any brands are allowed.
Can I use small detailing parts that are 3D printed?
Yes, but only small detailing parts. Similar to Kotobukiya option parts, these are allowed as long as they are not full conversion parts.
PRIZES
EACH CATEGORY
MERIT
MERIT
2ND
CHAMPION
3RD
MERIT
MERIT
RULES & REGULATION
Tetsujin is open to all hobbyists and enthusiasts from all nationalities except employees of Hobby Art Group and their immediate families.
The main entry/ base kit must not be a knock-off, resin or product of similar nature. Seek clarification from the organizers if in doubt.
After-market products, add-ons or materials of similar nature are permitted.
All entries must be wholly constructed and finished by the participant himself/herself.
Offensive and provocative subjects are strictly prohibited.
No restrictions on the number of entries each participant can enter for all categories. However, do note that registration fee (non-refundable) of S$ XXX per entry applies.
The entry must be submitted by the participant personally.
The organizer shall endeavor to ensure entries are adequately protected. However, they will not be liable for any loss and damage that may occur during the event.
Every entry will be inspected and rated by appointed judges. The judges’ decision is final and no appeal/ further correspondence will be taken into consideration.
Participants in contravention of the rules and regulations set out above will be disqualified without further notice.
Last but not least, challenge yourself and have fun!
DATA PRIVACY STATEMENT
In accordance with the Personal Data Protection Act 2012, I/We consent to the collection, use, disclosure of and/or process my/our personal data (whether contained in the Registration Form or otherwise obtained) by Hobby Art Galley, Hobby Art @ Work, Hobby Art Webshop hereby known as (“Hobby Art”), its affiliates and associates (within or outside Singapore), for the purpose relating to Tetsujin Competition and to provide information relating to the same to me/us by Short Message Service (SMS), Multimedia Messaging Service (MMS) and/or What's App (notwithstanding the registration of my/our telephone number(s) in the Singapore’s Do Not Call Registry).
By submitting this contest form, you agree that Hobby Art may collect, use and disclose your personal data, as provided in this entry form, for the following purposes in accordance with the Personal Data Protection Act 2012.
For more information on our Privacy Policy, please visit this link. Your personal data that we collect about you will be used and disclosed by us for the purpose(s) of:
- Processing your application for entering Tetsujin competition and its respective categories;
- Carrying out due diligence or other screening activities in accordance entry requirements for the respective categories;
- Responding to any inquiries by you;
- Handling any matters relating to the prizes you are entitled to under the associated events which you are entering for or have entered; (including the mailing of correspondence, invoices, or notices to you, which could involve disclosure of certain personal data about you to bring about delivery of the same as well as on the external cover of envelopes/mail packages).
JUNE
2026
SUBMISSION
DETAILS
& COLLECTION
VENUE - XXX
DATE - XXX
TIME - XXX
-
Kindly proceed to event area and approach our staff for registration.
-
After registration, your entry will be photographed at designated photo booth.
-
Following on, your entry will be placed into the display cabinets by our staff. Please take note that display placement will be determined by us. We deeply appreciate your understanding for this.
-
If your entry includes LED switches or battery components, please kindly inform our staff during registration.
-
Entries will be displayed during the event date.
-
For overseas participants, please kindly email / PM us if you are submitting after XXX. This will enable us to plan ahead for you too.
-
Judging will take place on XXX, between XXX to XXX.
-
The prize presentation will be held on XXX from XXX to XXX.
-
Mingle session with Judges will be from XXX to XXX.
-
Participants are highly encouraged to join the prize presentation and celebrate the joyous event together.
-
Kindly collect your entry on XXX from XXX to XXX.
Thank You!
TETSUJIN
EXCLUSIVE GIFTS
FOR PARTICIPANTS ONLY
Based on the category registered, each participants will receive their exclusive gift from us.
Please kindly collect your gift upon registration.